Technology Metro

It’s not always that you get your desktop as a complete unit and sometimes you will get it as a number of components and you will then have to assemble and install it together and you will have to assemble and install it step by step following specific instructions. There are a few things you will need to have before getting started for example anti-static wrist strap, a piece of cloth, set of screwdrivers and pliers, PC components, CPU Thermal compound.

Step 1: Install the motherboard

The first step is to install the motherboard, you have to take particular at this stage and ensure that the all the components are clean and that you have a big work area to work with.

You will have to put your antic-static wrist strap on to avoid your components from getting affected. Clean your hands before you start.

Step 2: Installing the power supply

The power supply is the second item that has to be installed into the computer, installing the power supply is very simple all you have to do is place the PSU into the cabinet and screw it in tightly.

Step 3: Installing the video card

The video card is the next item into the computer, you need to find a good video card as there are continuously being improved and you don’t want to be stuck with a card that is redundant.

Step 4: Installing the hard disk

The hard disk is one of the most important components of the computer and you will have to practice care when handling it. Installing the hard drive is not that difficult all you have to do is place it into the bay, screw it in tightly, connect it to the PSU with a power cable and connect it to the motherboard via a data cable.

Step 5: Installing the optical drive

The optical drive is next to go in and to install it you just simply follow the same instructions as that of installing the hard drive.

Step 6: Connecting the computers various cables

At this stage all that is left is to connect the computer various cables and to do that you have to
1. The ATX power connector on the PSU has to be connected to the power supply port on your motherboard.

2. The power, reset button has to be connected to the right port on the motherboard.

3. Connect the cable from the USB/audio panel to the motherboard.

4. Connect the cables for the cabinet fans

After this you will have to close the cabinet and screw it in tightly, having done this you would have finished installing the internal components and all that will be left would be to connect the external components of the computer together, these include the monitor, keyboard, mouse, CPU, this is a fairly easy process since you will have guideline on the computer manual. Once you are through with this then you can switch on your computer and start using it.